3D Printers:Creality K1 Max: Difference between revisions
Jump to navigation
Jump to search
(Created page with "[http://k1max.uas.run Web Interface] == Specs == Type: CoreXY Extruder: Dual-gear Direct Drive Build Volume: 300x300x300mm Bed Type: Magnetic Spring Steel Hot End: Micro Swiss FlowTech Nozzle Diameters: 4mm, 6mm Nozzle Type: Micro Swiss Brass Plated Wear Resistant Filament Size: 1.75mm === Supported Filaments === *ABS *PLA *PETG *PET *TPU *PA *ABS *ASA *PC PLA-CF *PA-CF *PET-CF") |
No edit summary |
||
| Line 12: | Line 12: | ||
Filament Size: 1.75mm | Filament Size: 1.75mm | ||
Slicer software: | |||
*Creality Slicer (Cura Based) | |||
*Prusa Slicer (Needs profile) | |||
*Orca Slicer (Needs profile) | |||
=== Supported Filaments === | === Supported Filaments === | ||
| Line 25: | Line 30: | ||
*PA-CF | *PA-CF | ||
*PET-CF | *PET-CF | ||
== Getting Started == | |||
-Power on the machine using the switch located on the back left of the printer. | |||
-Verify there are no obstructions in the printer | |||
Revision as of 21:22, 12 May 2024
Specs
Type: CoreXY Extruder: Dual-gear Direct Drive Build Volume: 300x300x300mm Bed Type: Magnetic Spring Steel
Hot End: Micro Swiss FlowTech Nozzle Diameters: 4mm, 6mm Nozzle Type: Micro Swiss Brass Plated Wear Resistant
Filament Size: 1.75mm
Slicer software:
- Creality Slicer (Cura Based)
- Prusa Slicer (Needs profile)
- Orca Slicer (Needs profile)
Supported Filaments
- ABS
- PLA
- PETG
- PET
- TPU
- PA
- ABS
- ASA
- PC PLA-CF
- PA-CF
- PET-CF
Getting Started
-Power on the machine using the switch located on the back left of the printer. -Verify there are no obstructions in the printer