Knowledge Arcana: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
The purpose of this page is to provide a dump of random useful facts which are not easily found anywhere else and are not easily categorized | The purpose of this page is to provide a dump of random useful facts which are not easily found anywhere else and are not easily categorized | ||
* There is a special network for IoT devices, in case you're working with a device that can't make it past the paywall. | * There is a special network for IoT devices, in case you're working with a device that can't make it past the paywall. Here is the wpa supplicant configuration. In Raspberry Pi you can drop this in /etc/wpa-supplicant/wpa-supplicant.conf | ||
country=GB | |||
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev | |||
update_config=1 | |||
network={ | |||
ssid="uas-special" | |||
scan_ssid=1 | |||
psk="askflayorcoreyforpassword" | |||
mode=0 | |||
proto=WPA2 | |||
key_mgmt=WPA-PSK | |||
pairwise=CCMP | |||
group=CCMP | |||
auth_alg=OPEN | |||
id_str="nameofthedevice" | |||
priority=1 | |||
} |
Revision as of 14:03, 16 July 2017
The purpose of this page is to provide a dump of random useful facts which are not easily found anywhere else and are not easily categorized
- There is a special network for IoT devices, in case you're working with a device that can't make it past the paywall. Here is the wpa supplicant configuration. In Raspberry Pi you can drop this in /etc/wpa-supplicant/wpa-supplicant.conf
country=GB
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="uas-special" scan_ssid=1 psk="askflayorcoreyforpassword" mode=0 proto=WPA2 key_mgmt=WPA-PSK pairwise=CCMP group=CCMP auth_alg=OPEN id_str="nameofthedevice" priority=1
}