Intro to electronics - build a sequencer: Difference between revisions

From Unallocated Space
Jump to navigation Jump to search
(Created page with "This workshop is intended as an introduction to electronics as well as a hands on workshop where you will build your own sequencer. The inspiration for this comes from the DIY e...")
 
 
(6 intermediate revisions by one other user not shown)
Line 1: Line 1:
This workshop is intended as an introduction to electronics as well as a hands on workshop where you will build your own sequencer.  The inspiration for this comes from the DIY electronic music community.  Special thanks goes to Rich Decibels for his outstanding keyquencer designs on which the project is based.
This workshop is intended as an introduction to electronics as well as a hands on workshop where you will build your own sequencer.  The inspiration for this comes from the DIY electronic music community.  Special thanks goes to Rich Decibels for his outstanding keyquencer designs on which the final project is based.


This workshop will span approximately 3 separate nights with a possibility for more as needed.
This workshop will span approximately 3 separate nights with a possibility for more as needed.


'''General outline'''
[[File:Parts1.jpg]]


'''1st Session - General introduction to electronics'''
==General outline ==
  Current Flow
<pre style="color:red"> DRAFT------------------------DRAFT</pre>
  Resistors
===1st Session - General introduction to electronics===
  Capacitors
*Current Flow
  Power supplies
*Resistors
  Breadboarding
*Capacitors
  Integrated circuits
*Power supplies
  Flashing LED
*Breadboarding
  Oscillator
*Integrated circuits
*Bread board amp project
*Oscillator


'''2nd Session components of'''
===2nd Session Soldering, Oscillators and Sequencer===
  Bread board amp project
*Intro to soldering
  Intro to soldering
*Solder amp project   
  Solder amp project   
*Schmitt triggers
  Schmitt triggers
*Logic Gates
  Logic Gates
*Intro to simple Oscillator
  Intro to simple Oscillator
*Breadboard simple Oscillator
  Breadboard simple Oscillator
*Design
  Design
**circuit
    - circuit
**physical - HOMEWORK!!!
    - physical


'''3rd Session'''
===3rd Session Sequencer Build===
    Sequencer build
*Sequencer build
    Intro to Debugging
*Intro to Debugging
*Sequencer fixing
<pre style="color:red"> DRAFT------------------------DRAFT</pre>
 
==References/Links==
#[http://richdecibels.com/blog/ Rich Decibels]
#[http://www.fluxmonkey.com/electronoize.htm Flux Monkey's electronoize playshops]
#[http://electro-music.com/forum/forum-112.html Electromusic.com DIY Hardware forums]
 
[[Category:Classes_and_Workshops]]

Latest revision as of 13:50, 8 January 2023

This workshop is intended as an introduction to electronics as well as a hands on workshop where you will build your own sequencer. The inspiration for this comes from the DIY electronic music community. Special thanks goes to Rich Decibels for his outstanding keyquencer designs on which the final project is based.

This workshop will span approximately 3 separate nights with a possibility for more as needed.

General outline

 DRAFT------------------------DRAFT

1st Session - General introduction to electronics

  • Current Flow
  • Resistors
  • Capacitors
  • Power supplies
  • Breadboarding
  • Integrated circuits
  • Bread board amp project
  • Oscillator

2nd Session Soldering, Oscillators and Sequencer

  • Intro to soldering
  • Solder amp project
  • Schmitt triggers
  • Logic Gates
  • Intro to simple Oscillator
  • Breadboard simple Oscillator
  • Design
    • circuit
    • physical - HOMEWORK!!!

3rd Session Sequencer Build

  • Sequencer build
  • Intro to Debugging
  • Sequencer fixing
 DRAFT------------------------DRAFT

References/Links

  1. Rich Decibels
  2. Flux Monkey's electronoize playshops
  3. Electromusic.com DIY Hardware forums
Retrieved from "https://www.wiki.unallocatedspace.org/wiki/index.php?title=Intro_to_electronics_-_build_a_sequencer&oldid=1251"