3D Printing: Difference between revisions

From Unallocated Space
Jump to navigation Jump to search
No edit summary
 
(31 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Unallocated Space has acquired the parts to start building a 3D printer called a RepRap Prusa Mendel.  
Unallocated Space has two main 3D printers set up for use. The Creality K1 Max and Creality CR-10.


This bot will be a valuable addition to the space and can be used as a source of custom one off parts as well as fun odds and ends.  
These are connected to a laptop with the Cura slicer software.


The 3D printing initiative will be headed up by Hexjunkie, please see him if you have any questions.
= Printers =


== [[3D Printers:Creality K1 Max|Creality K1 Max]] ==
[https://www.creality.com/products/creality-k1-max-3d-printer Manufacture Page]


= List of parts to purchase=


==Mechanical==
Nozzle size: 4mm, 6mm
{| class="wikitable"
|-
! Quantity
! Item
! Link
! Note
! Purchased
|-
| 1
| pane of glass 7 7/8"x 7-7/8"
| None
| None
| No
|-
| 1
| Plastruder
| [http://www.makergear.com/products/plastruder]
| 1.75mm filament
| No
|-
| 83
| 5/16" Nuts
| [http://www.lowes.com/pd_56106-37672-35002_0__?productId=3035552&Ntt=m8+nut+100+count&pl=1&currentURL=%2Fpl__0__s%3FNtt%3Dm8%2Bnut%2B100%2Bcount&facetInfo=]
| Stainless
| No
|-
| 93
| 5/16" Washers
| [http://www.lowes.com/pd_1990-37672-35007_0__?productId=3019934&Ntt=m8+washer+100+count&pl=1&currentURL=%2Fpl__0__s%3FNtt%3Dm8%2Bwasher%2B100%2Bcount%26page%3D2&facetInfo=]
| Stainless
| No
|-
| 6
| 5/16" x 30 Fender Washers
| unknown
| Stainless
| No
|-
| 2
| M4 x 20 Bolt
| Link
| Note
| No
|-
| 2
| M4 Nut
| Link
| Note
| No
|-
| 2
| M4 Washer
| Link
| Note
| No
|-
| 22
| M3 x 10 Bolt
| Link
| Note
| No
|-
| 16
| M3 x 25 Bolt
| Link
| Note
| No
|-
| 4
| M3 x 40 Bolt
| Link
| Note
| No
|-
| 70
| M3 Washer
| Link
| Note
| No
|-
| 40
| M3 Nut
| Link
| Note
| No
|-
| 2
| M3 Grub Screw
| Link
| Note
| No
|-
| 3
| 608 Roller Skate Bearing
| [http://www.vxb.com/page/bearings/PROD/608ZZ10-1]
| Note
| No
|-
| 6
| 5/16" x 370mm Threaded Rod
| Link
| Note
| No
|-
| 4
| 5/16" x 294mm Threaded Rod
| Link
| Note
| No
|-
| 3
| 5/16" x 440mm Threaded Rod
| Link
| Note
| No
|-
| 2
| 5/16" x 210mm Threaded Rod
| Link
| Note
| No
|-
| 1
| 5/16" x 50mm Threaded Bolt
| Link
| Note
| No
|-
| 2
| Everbilt 1/2 in. x 1-1/2 in. and 7/16 in. x 2-1/8 in. Zinc-Plated Compression Springs (4-Pack)
| [http://www.homedepot.com/h_d1/N-5yc1v/R-202045476/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053]
| Needed for the threaded rods
| No
|-
| 2
| 8mm x 420mm Smooth Rod
| Link
| Note
| No
|-
| 4
| 8mm x 406mm Precision Rod
| [http://www.vxb.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=bearings&Product_Code=kit11867]
| Note
| No
|-
| 2
| 8mm x 330 mm Precision Rod
| [http://www.vxb.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=bearings&Product_Code=kit11868]
| Note
| No
|-
| 1
| 225mm x 225mm
| Link
| Steel
| No
|-
| 1
| 140mm x 225mm
| Link
| Steel
| No
|-
| 1
| 840mm x 5mm Belt
| [http://www.mcmaster.com/#57105k11/=eu7gde]
| Rubber
| No
|-
| 1
| 900mm x 5mm Belt
| [http://www.mcmaster.com/#57105k11/=eu7gde]
| Rubber
| No
|-
| 5
| NEMA Bi-Polar Stepper Motor
| [http://www.lulzbot.com/en/48-nema-17-stepper-motors.html]
| Recommended by Midsouth Makers
| No
|-
| 50
| Zip Ties
| Link
| Small
| No
|-
| 1
| Maker Gear Plastruder
| [http://www.makergear.com/products/plastruder] - $170
| Prusa Stepper Plastruder Kit (.35mm hybrid for 1.75mm filament)
| No
|-
|2
| Pully
| [http://www.mcmaster.com/#57105k11/=eu7gde]
| Recommended by Midsouth Makers
| No
|-
|1
| Hobbled Bolt
| [http://www.lulzbot.com/en/7-hobbed-bolts.html]
| Recommended by Midsouth Makers
| No
|}


==Electronic==
Nozzle material: Brass plated wear resistant
{| class="wikitable"
|-
! Quantity
! Item
! Link
! Note
! Purchased
|-
| 1
| Heated Bed
| [http://ultimachine.com/content/prusa-pcb-heated-bed] $50.00
| Recommended by Midsouth Makers
| No
|-
| 1
| RAMPS DIY Kit
| [http://ultimachine.com/content/ramps-diy-kit-complete] $162.00
| Recommended by Midsouth Makers
| YES
|-
|
|
|
|
|
|-
|
|
|
|
|
|-
|
|
|
|
|
|-
|}
= Ideas in the works =


Hotend: Micro Swiss FlowTech


= Ongoing Projects =
 
Filament size: 1.75mm
 
Supported filamnet: ABS/PLA/PETG/PET/TPU/PA/ABS/ASA/PC PLA-CF/PA-CF/PET-CF
 
 
Build Volume: 300x300x300mm
 
== Creality CR-10s ==
[https://www.creality3dofficial.com/products/official-creality-cr-10s-3d-printer Manufacture Website]
 
Filament size: 1.75mm
 
Supported filament: PL/PETG/TPU/wood
 
Bed size: 300mm × 300mm × 400mm
 
== Lulzbot Mini 1 ==
[https://lulzbot.com/store/lulzbot-mini Manufacture Website]
 
Bed size: 152mm x 152mm x 158mm
 
Won in an essay contest.
 
== Legacy Printers ==
* [[3D Printers:RepRap Prusa|RepRap Prusa]]
* [[3D Printers:Lulzbot Taz 3|Lulzbot Taz 3]]
 
= Common Problems =
 
If you receive the following error message when launching Cura from Terminal, or nothing happens when you launch Cura through the GUI, do this:
 
Error message: /usr/share/cura-lulzbot/cura-lulzbot: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.28' not found (required by /usr/share/cura-lulzbot/cura-lulzbot)
 
Solution: In terminal, run the command "sudo apt remove -y cura-lulzbot && sudo apt install -y cura-lulzbot=3.2.32" (without quotes) .
 
If you cannot save a profile in Cura, make sure you own all the files/directories in your home folder. We had this issue when someone ran it using sudo.
 
Solution: sudo chmod -R unallocatedspace:unallocatedspace ~/
 
[[Category:Station]]

Latest revision as of 06:40, 13 May 2024

Unallocated Space has two main 3D printers set up for use. The Creality K1 Max and Creality CR-10.

These are connected to a laptop with the Cura slicer software.

Printers

Creality K1 Max

Manufacture Page


Nozzle size: 4mm, 6mm

Nozzle material: Brass plated wear resistant

Hotend: Micro Swiss FlowTech


Filament size: 1.75mm

Supported filamnet: ABS/PLA/PETG/PET/TPU/PA/ABS/ASA/PC PLA-CF/PA-CF/PET-CF


Build Volume: 300x300x300mm

Creality CR-10s

Manufacture Website

Filament size: 1.75mm

Supported filament: PL/PETG/TPU/wood

Bed size: 300mm × 300mm × 400mm

Lulzbot Mini 1

Manufacture Website

Bed size: 152mm x 152mm x 158mm

Won in an essay contest.

Legacy Printers

Common Problems

If you receive the following error message when launching Cura from Terminal, or nothing happens when you launch Cura through the GUI, do this:

Error message: /usr/share/cura-lulzbot/cura-lulzbot: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.28' not found (required by /usr/share/cura-lulzbot/cura-lulzbot)

Solution: In terminal, run the command "sudo apt remove -y cura-lulzbot && sudo apt install -y cura-lulzbot=3.2.32" (without quotes) .

If you cannot save a profile in Cura, make sure you own all the files/directories in your home folder. We had this issue when someone ran it using sudo.

Solution: sudo chmod -R unallocatedspace:unallocatedspace ~/

Retrieved from "https://www.wiki.unallocatedspace.org/wiki/index.php?title=3D_Printing&oldid=1354"