3D Printing: Difference between revisions

From Unallocated Space
Jump to navigation Jump to search
 
(21 intermediate revisions by the same user not shown)
Line 1: Line 1:
Unallocated Space has acquired the parts to start building a 3D printer called a RepRap Prusa Mendel.  
Unallocated Space has two main 3D printers set up for use. The Creality K1 Max and Creality CR-10.


This bot will be a valuable addition to the space and can be used as a source of custom one off parts as well as fun odds and ends.  
These are connected to a laptop with the Cura slicer software.


The 3D printing initiative will be headed up by Hexjunkie, please see him if you have any questions.
= Printers =


== [[3D Printers:Creality K1 Max|Creality K1 Max]] ==
[https://www.creality.com/products/creality-k1-max-3d-printer Manufacture Page]


= List of parts to purchase=


[[3d_printer_parts]]
Nozzle size: 4mm, 6mm


= Purchased Parts with Links=
Nozzle material: Brass plated wear resistant


Prusa Mendel Hardware Kit: [http://www.a2aprinter.com/index.php?route=product/product&path=18&product_id=47]
Hotend: Micro Swiss FlowTech
Prusa Mendel Printed Parts: [http://www.midsouthmakers.org/]
RAMPS DIY Kit: [http://ultimachine.com/content/ramps-diy-kit-complete]
Heated Print Bed: [http://ultimachine.com/content/prusa-pcb-heated-bed]
Plastruder: [http://www.makergear.com/products/plastruder]
Hobbled Bolt: [http://www.lulzbot.com/en/7-hobbed-bolts.html]
NEMA17 Stepper Motors: [http://www.a2aprinter.com/index.php?route=product/product&path=33&product_id=51]


=Cost of 3DPrinter=
*Printed Parts = $50
*PRUSA PCB Heated Bed from UltiMachine $55.00 + $8.68 Shipping = Total $63.68
*Hardware Kit and Stepper Motors from A2APrinter $115.63 + $88.95 + $49.42 Shipping = $253.99
*RAMPS DIY Kit was purchased by a member of the space, I will update when I have real numbers
*Prusa Stepper Plastruder from MakerGear $170.00 + $7.48 Shipping = Total $177.48
*Hobbled Bolt from LulzBot $7.00 + $5.60 Shipping = Total $12.60


Total for all parts including shipping: $557.75 + RAMPS DIY Kit
Filament size: 1.75mm


= Assembly =
Supported filamnet: ABS/PLA/PETG/PET/TPU/PA/ABS/ASA/PC PLA-CF/PA-CF/PET-CF


Why re-invent the wheel, RepRap offers a beautiful instruction page.


Please check [http://reprap.org/wiki/Prusa_Mendel_Assembly]for instructions.
Build Volume: 300x300x300mm


= Ideas in the works =
== Creality CR-10s ==
[https://www.creality3dofficial.com/products/official-creality-cr-10s-3d-printer Manufacture Website]


Filament size: 1.75mm


= Ongoing Projects =
Supported filament: PL/PETG/TPU/wood


=UPDATES=
Bed size: 300mm × 300mm × 400mm


To date we have had a total of 1 major purchase made to the project: the RAMPS DIY Kit
== Lulzbot Mini 1 ==
I have created a parts list from McMaster Carr that I am verifying now. I should place the order this month.(January 2012)
[https://lulzbot.com/store/lulzbot-mini Manufacture Website]
The project has received a total of $100 in cash donations.


1/19/2012
Bed size: 152mm x 152mm x 158mm
Total in Donations has gone up by $160 for a total of $260 donated to the project


*LulzBot Order #000499 - Hobbled Bolt
Won in an essay contest.
*MakerGear Order #5904 - Plastruder
*A2A Printer Order ID: 71 - Stepper Motors and Hardware kit
*UltiMachine Order #6446 - Heated Bed


=Common Problems=
== Legacy Printers ==
* [[3D Printers:RepRap Prusa|RepRap Prusa]]
* [[3D Printers:Lulzbot Taz 3|Lulzbot Taz 3]]
 
= Common Problems =


If you receive the following error message when launching Cura from Terminal, or nothing happens when you launch Cura through the GUI, do this:
If you receive the following error message when launching Cura from Terminal, or nothing happens when you launch Cura through the GUI, do this:
Line 66: Line 54:


Solution: sudo chmod -R unallocatedspace:unallocatedspace ~/
Solution: sudo chmod -R unallocatedspace:unallocatedspace ~/
[[Category:Station]]

Latest revision as of 06:40, 13 May 2024

Unallocated Space has two main 3D printers set up for use. The Creality K1 Max and Creality CR-10.

These are connected to a laptop with the Cura slicer software.

Printers

Creality K1 Max

Manufacture Page


Nozzle size: 4mm, 6mm

Nozzle material: Brass plated wear resistant

Hotend: Micro Swiss FlowTech


Filament size: 1.75mm

Supported filamnet: ABS/PLA/PETG/PET/TPU/PA/ABS/ASA/PC PLA-CF/PA-CF/PET-CF


Build Volume: 300x300x300mm

Creality CR-10s

Manufacture Website

Filament size: 1.75mm

Supported filament: PL/PETG/TPU/wood

Bed size: 300mm × 300mm × 400mm

Lulzbot Mini 1

Manufacture Website

Bed size: 152mm x 152mm x 158mm

Won in an essay contest.

Legacy Printers

Common Problems

If you receive the following error message when launching Cura from Terminal, or nothing happens when you launch Cura through the GUI, do this:

Error message: /usr/share/cura-lulzbot/cura-lulzbot: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.28' not found (required by /usr/share/cura-lulzbot/cura-lulzbot)

Solution: In terminal, run the command "sudo apt remove -y cura-lulzbot && sudo apt install -y cura-lulzbot=3.2.32" (without quotes) .

If you cannot save a profile in Cura, make sure you own all the files/directories in your home folder. We had this issue when someone ran it using sudo.

Solution: sudo chmod -R unallocatedspace:unallocatedspace ~/