Unallocated Space has acquired the parts to start building a 3D printer called a RepRap Prusa Mendel.

This bot will be a valuable addition to the space and can be used as a source of custom one off parts as well as fun odds and ends.

The 3D printing initiative will be headed up by Hexjunkie, please see him if you have any questions.

List of parts to purchase

Mechanical

Quantity	Item	Link	Note	Purchased
1	pane of glass 7 7/8"x 7-7/8"	None	None	No
1	Plastruder	[1]	1.75mm filament	No
83	5/16" Nuts	[2]	Stainless	No
93	5/16" Washers	[3]	Stainless	No
6	5/16" x 30 Fender Washers	unknown	Stainless	No
2	M4 x 20 Bolt	Link	Note	No
2	M4 Nut	Link	Note	No
2	M4 Washer	Link	Note	No
22	M3 x 10 Bolt	Link	Note	No
16	M3 x 25 Bolt	Link	Note	No
4	M3 x 40 Bolt	Link	Note	No
70	M3 Washer	Link	Note	No
40	M3 Nut	Link	Note	No
2	M3 Grub Screw	Link	Note	No
3	608 Roller Skate Bearing	[4]	Note	No
6	5/16" x 370mm Threaded Rod	Link	Note	No
4	5/16" x 294mm Threaded Rod	Link	Note	No
3	5/16" x 440mm Threaded Rod	Link	Note	No
2	5/16" x 210mm Threaded Rod	Link	Note	No
1	5/16" x 50mm Threaded Bolt	Link	Note	No
2	Everbilt 1/2 in. x 1-1/2 in. and 7/16 in. x 2-1/8 in. Zinc-Plated Compression Springs (4-Pack)	[5]	Needed for the threaded rods	No
2	8mm x 420mm Smooth Rod	Link	Note	No
4	8mm x 406mm Precision Rod	[6]	Note	No
2	8mm x 330 mm Precision Rod	[7]	Note	No
1	225mm x 225mm	Link	Steel	No
1	140mm x 225mm	Link	Steel	No
1	840mm x 5mm Belt	[8]	Rubber	No
1	900mm x 5mm Belt	[9]	Rubber	No
5	NEMA Bi-Polar Stepper Motor	[10]	Recommended by Midsouth Makers	No
50	Zip Ties	Link	Small	No
1	Wade's Geared Extruder	[11]	Have Printed Parts, need electronics	No
2	Pully	[12]	Recommended by Midsouth Makers	No
1	Hobbled Bolt	[13]	Recommended by Midsouth Makers	No

Quantity	Item	Link	Note	Purchased
1	Heated Bed	[14] $50.00	Recommended by Midsouth Makers	No
1	RAMPS DIY Kit	[15] $162.00	Recommended by Midsouth Makers	No