3d printer parts: Difference between revisions

From Unallocated Space
Jump to navigation Jump to search
No edit summary
No edit summary
Line 224: Line 224:
{| class="wikitable"
{| class="wikitable"
|-
|-
M3:
!M3:
|-
|-
22 pcs - M3x10 Cap Screw
|22 pcs - M3x10 Cap Screw
|-
|-
16 pcs - M3x25 Cap Screw
|16 pcs - M3x25 Cap Screw
|-
|-
04 pcs - M3x40 Cap Screw
|04 pcs - M3x40 Cap Screw
|-
|-
02 pcs - M3x06 Set Screw
|02 pcs - M3x06 Set Screw
|-
|-
70 pcs - M3 Washer
|70 pcs - M3 Washer
|-
|-
40 pcs - M3 Regular Nut
|40 pcs - M3 Regular Nut
|-
|-
M8:
!M8:
|-
|-
83 pcs - M8 Regular Nut
|83 pcs - M8 Regular Nut
|-
|-
93 pcs - M8 Washer
|93 pcs - M8 Washer
|-
|-
06 pcs - M8x30/M10x30 Fender Washers M4:
|06 pcs - M8x30/M10x30 Fender Washers M4:
|-
|-
02 pcs - M4x20 Cap Screw
!M4:
|-
|-
02 pcs - M4 Washer
|02 pcs - M4x20 Cap Screw
|-
|-
02 pcs - M4 Regular Nut
|02 pcs - M4 Washer
|-
|-
Ball Bearing:
|02 pcs - M4 Regular Nut
|-
|-
3 - 608ZZ Ball Bearing
!Ball Bearing:
|-
|-
T5 Belts:
|3 - 608ZZ Ball Bearing
|-
|-
840mm (for Y axis)
!T5 Belts:
|-
|-
950mm (for X axis)
|840mm (for Y axis)Width:5mm; Pitch:5mm
|-
|-
Width:5mm; Pitch:5mm
|950mm (for X axis)Width:5mm; Pitch:5mm
|-
|-
Spring - 4 pcs
!Springs
|-
|-
8mm Stainless Steel Bar:
|Spring - 4 pcs
|-
|-
2x 420mm (x-bar)
!8mm Stainless Steel Bar:
|-
|-
2x 406mm (y-bar)
|2x 420mm (x-bar)
|-
|-
2x 350mm (z-bar)
|2x 406mm (y-bar)
|-
|-
3.5mm Aluminium Printed Plate (Option)
|2x 350mm (z-bar)
|-
|-
1 pcs - 140mm x 225mm
!3.5mm Aluminium Printed Plate
|-
|-
1 pcs - 225mm x 225mm M8 Threaded Rod:
|1 pcs - 140mm x 225mm
|-
|-
6x 370mm (three per side)
|1 pcs - 225mm x 225mm
|-
|-
4x 294mm (front/rear)
!M8 Threaded Rod:
|-
|-
3x 440mm (top/bottom)
|6x 370mm (three per side)
|-
|-
2x 210mm (z-leadscrew)
|4x 294mm (front/rear)
|-
|-
1x 50mm (x idler)
|3x 440mm (top/bottom)
|-
|2x 210mm (z-leadscrew)
|-
|1x 50mm (x idler)
|}
|}


Which leaves the following Parts left to purchase:
Which leaves the following Parts left to purchase:
{| class="wikitable"
|-
5x NEMA 17 Bi-Polar Stepper Motors
|-
50x Zip Ties
|-
1x MakerGear Plastruder
|-
2x Pullys
|-
1x Hobbled Bolt
|}

Revision as of 09:14, 19 January 2012

This is the list of parts required for purchase to build a 3D printer. I will break them down as to where I purchased the parts at.

General Full List of Parts

Quantity Item Link Note Purchased
1 pane of glass 7 7/8"x 7-7/8" None None No
1 Plastruder [1] 1.75mm filament No
83 5/16" Nuts [2] Stainless No
93 5/16" Washers [3] Stainless No
6 5/16" x 30 Fender Washers unknown Stainless No
2 M4 x 20 Bolt Link Note No
2 M4 Nut Link Note No
2 M4 Washer Link Note No
22 M3 x 10 Bolt Link Note No
16 M3 x 25 Bolt Link Note No
4 M3 x 40 Bolt Link Note No
70 M3 Washer Link Note No
40 M3 Nut Link Note No
2 M3 Grub Screw Link Note No
3 608 Roller Skate Bearing [4] Note No
6 5/16" x 370mm Threaded Rod Link Note No
4 5/16" x 294mm Threaded Rod Link Note No
3 5/16" x 440mm Threaded Rod Link Note No
2 5/16" x 210mm Threaded Rod Link Note No
1 5/16" x 50mm Threaded Bolt Link Note No
2 Everbilt 1/2 in. x 1-1/2 in. and 7/16 in. x 2-1/8 in. Zinc-Plated Compression Springs (4-Pack) [5] Needed for the threaded rods No
2 8mm x 420mm Smooth Rod Link Note No
4 8mm x 406mm Precision Rod [6] Note No
2 8mm x 330 mm Precision Rod [7] Note No
1 225mm x 225mm Link Steel No
1 140mm x 225mm Link Steel No
1 840mm x 5mm Belt [8] Rubber No
1 900mm x 5mm Belt [9] Rubber No
5 NEMA Bi-Polar Stepper Motor [10] Recommended by Midsouth Makers No
50 Zip Ties Link Small No
1 Maker Gear Plastruder [11] - $170 Prusa Stepper Plastruder Kit (.35mm hybrid for 1.75mm filament) No
2 Pully [12] Recommended by Midsouth Makers No
1 Hobbled Bolt [13] Recommended by Midsouth Makers No
1 Heated Bed [14] $50.00 Recommended by Midsouth Makers YES
1 RAMPS DIY Kit [15] $162.00 Recommended by Midsouth Makers YES

A2A Printer Hardware Kit Includes

M3:
22 pcs - M3x10 Cap Screw
16 pcs - M3x25 Cap Screw
04 pcs - M3x40 Cap Screw
02 pcs - M3x06 Set Screw
70 pcs - M3 Washer
40 pcs - M3 Regular Nut
M8:
83 pcs - M8 Regular Nut
93 pcs - M8 Washer
06 pcs - M8x30/M10x30 Fender Washers M4:
M4:
02 pcs - M4x20 Cap Screw
02 pcs - M4 Washer
02 pcs - M4 Regular Nut
Ball Bearing:
3 - 608ZZ Ball Bearing
T5 Belts:
840mm (for Y axis)Width:5mm; Pitch:5mm
950mm (for X axis)Width:5mm; Pitch:5mm
Springs
Spring - 4 pcs
8mm Stainless Steel Bar:
2x 420mm (x-bar)
2x 406mm (y-bar)
2x 350mm (z-bar)
3.5mm Aluminium Printed Plate
1 pcs - 140mm x 225mm
1 pcs - 225mm x 225mm
M8 Threaded Rod:
6x 370mm (three per side)
4x 294mm (front/rear)
3x 440mm (top/bottom)
2x 210mm (z-leadscrew)
1x 50mm (x idler)

Which leaves the following Parts left to purchase:

5x NEMA 17 Bi-Polar Stepper Motors 50x Zip Ties 1x MakerGear Plastruder 2x Pullys 1x Hobbled Bolt
Retrieved from "https://www.wiki.unallocatedspace.org/wiki/index.php?title=3d_printer_parts&oldid=355"